About the Bazooka RS804DV
You know your system is lacking power and authority — those bass drums sound more like someone banging on your car door — but you just don't have the room for a full-blown sub rig. Help is on the way. The Bazooka RS804DV generates more bass than previous passive 8" tubes, yet it's still in a package that fits conveniently in the side of your trunk or back seat.
This redesigned RS series Bazooka features a dual voice coil for flexibility in hook-up and sheer power in production — up to 400 watts RMS with a bridged or mono amp! With gold-plated, 5-way binding posts and a 2-year warranty, your friends really will be banging on your car door to hitch a ride full of booming bass.
Details:- 8" dual voice coil woofer
- frequency response 39-1,500 Hz
- handles 200 watts RMS (each coil)
- sensitivity 102 dB
- 8-1/2"W x 18-3/16"L x 10-1/16"H
What's in the box:
Bazooka RS804DV owner's manual
- 1 Tube-style subwoofer with attached grille
- Two 38" mounting straps
- 2 Mounting plates
- Four 1" self-tapping screws
- Manual
- Warranty/registration card
- Power handling notice
- "Bridge Plate Alert" note (note about jumpers on terminals)
Customer reviews for Bazooka RS804DV
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Bazooka RS804DV
Features & specs
| General | ||
|---|---|---|
| Woofer Size (inches) | 8 | |
| Speakers Per Box | --- | |
| Woofer Material | Paper | |
| Enclosure Type | Ported | |
| Color | Black | |
| Pieces in System | 1 | |
| Width (inches) | 8-1/2 | |
| Height (inches) | 10-1/16 | |
| Depth (inches) | 18-3/16 | |
| Connector Type | 5-way posts | |
| Frequency Response | 39-1500 Hz | |
| Power Range (Watts RMS) | 200 | |
| Maximum Wattage | 400 | |
| Sensitivity | 102 dB | |
| Impedance | 2 ohms or 8 ohms | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
Product Research
Woofer Materials: The woofer cone is made of water resistant laminated paper, and the surround is made of foam.
Dual Voice Coils: The woofer has two 4 ohm voice coils, and each coil can handle up to 200 watts RMS (400 watts peak). Each voice coil has its own set of input terminals. Gold-plated bridge plates (jumpers) are included to connect the two sets of terminals together for connection to a mono or bridged amplifier. When the bridge plates are installed, the voice coils are wired in parallel with each other, so the woofer presents a 2 ohm mono load. With the bridge plates installed, the Bazooka may be connected to a mono, or bridged, amplifier capable of delivering up to 400 watts RMS. When the bridge plates are removed, each coil may be connected to a different amplifier channel, and each channel will see a 4 ohm load. With the bridge plates removed, each set of terminals can be connected to a stereo amplifier capable of delivering up to 200 watts RMS per channel.
Warning Note: If you will be using an amplifier that cannot handle a 2 ohm mono load, the bridge plates should be removed, and each set of terminals should be connected to a separate channel on a stereo amplifier. Connecting this subwoofer, with the bridge plates installed, to a mono, or bridged, amplifier that is not 2 ohm stable will result in amplifier damage.
"Turbo Cooled" Voice Coils: The pole piece is vented, allowing more air into the voice coil gap. Air circulating around the voice coils helps dissipate heat, resulting in greater power handling and increased reliability.
Moisture Resistant Enclosure: The enclosure is moisture resistant for reliable operation in humid conditions.
Gold-Plated 5-Way Binding Posts: The input terminals are gold-plated to resist corrosion. The binding posts will accept bare wire, spade lugs, banana plugs, dual banana plugs and pin connectors. The posts are recessed into a cup at the end of the tube opposite the woofer.
Mounting Method: There are 2 mounting bases which are made to be attached to your vehicle with the provided 1" self-tapping screws. Once the mounting bases are installed, the tube can be placed on the bases and secured with the included mounting straps. For best results, the tube should be mounted facing into a corner, and there should be 2 to 4 inches between the woofer and the corner into which it is pointing.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
